Your Building Site CCTV system has a built in siren and strobe which activates when an intrusion occurs. You can disarm this from your app anytime you need. To disarm the system you just need to tap on the bell Icon so that it has a line through it like below. To rearm it you just need to tap it again so the line disappears.
This shows that the Alarm is currently turned on. Meaning that if someone enters the site, the siren and strobe will activate you will also receive a notification.
Alternative way of turning on the alarm.
- Tap the 3 dots next to your camera name
- Tap on Settings
- Tap on Notifications
- Tap on Receive events and push notifications, and allow Audio and Strobe Light alarms on device. This should now have a tick next to it.
This shows that the Alarm is currently turned off. Meaning that if someone enters the site, the siren and strobe will not activate you will also not receive a notification until it is turned back on.
Alternative way of turning off the alarm.
- Tap the 3 dots next to your camera name
- Tap on Settings
- Tap on Notifications
- Tap on Receive events but NOT push notifications, and NOT allow Audio and Strobe Light alarms on device. This should now have a tick next to it.
